Q. I would like to re veneer
my kitchen cabinets using the peel and stick veneer. Does the peel and stick veneer really stick
for 20+ years?Will the edges stay
smooth, with no chipping or edge peeling?A. We have lots of customers
who use the peel and stick veneers for kitchen cabinet refacing. My customers have been using the peel and
stick veneers since 1974, and I’ve never had a…
Q. Does a wood backed sheet lay flatter than a paper backed
sheet? Does the PSA peel and stick
adhesive have an affect on the flatness of a veneer sheet?A. Both wood backed
veneers and paper backed veneers will lay flat.When you receive your veneer, remove it from the box and lay it flat on
the floor at normal room temperature, and the veneer will relax.The
wood backed veneers may someti…
Q. Hi Bob Morgan.I’m
refinishing and re veneering my kitchen cabinets. My thought is to veneer the
sides first with wood backed veneer, then the faces with paper backed so the
edge thickness is least noticeable. Does
that make sense or is neither that noticeable edgewise.A.The
10 mil paper backed veneers have a very thin edge profile (approximately 1/64”).The wood backed veneers have a thicke…
Q. What is a book matched veneer sheet?A. It is common to book match veneers. In fact, book matched
veneers are almost always present in all furniture. Here's how the book matching of veneers works: A log
is sliced into thin veneer sheets. The veneer sheets are sequenced and
kept in order. A sheet is virtually identical to the sheet above it and the
sheet below it. If you take…
Q. I’m Looking to cover an exterior
entrance door with wood veneer.
I am in NY. Sometimes rain, splash, or snow will get
on the door.
Do you have a suitable wood veneer to cover an
exterior door?
Is there any protective finish that I can apply?
Please advise
ThanksDonA. You can veneer an exterior door, yes…….But: For best
results you should use a waterproof glue, such as Titebond 3, wit…
Q. How can I join my veneer edging strips at the corners to make a 45 degree angle joint?A. Yes, it is possible to make a 45 degree joint with your veneer edging strips. It might take a couple of tries. Use the peel and stick veneer edging strips. The veneer strips should be a little over sized - wider than the area being covered. This allows for trimming after you apply the edging strips.…
